PA66 CF30 BLACK mechanical properties and COA results
Looking for PA66 CF30 BLACK material properties, tensile strength or flexural modulus? The available evidence is the supplied certificate of analysis (COA), covering two batches of Polyamide 66 CF 30 BLACK. The table below keeps each result tied to its batch and ISO method.
| Property / test method | 260907-1 | 260902-1 |
|---|---|---|
| Tensile strength · ISO 527 | 251.1 MPa | 249.3 MPa |
| Flexural strength · ISO 178 | 356.3 MPa | 360.5 MPa |
| Flexural modulus · ISO 178 | 20.8 GPa | 21.1 GPa |
| Charpy notched impact · ISO 179 | 7.8 kJ/m² | 7.9 kJ/m² |
| Density · ISO 1183 | 1.27 g/cm³ | 1.27 g/cm³ |
PA66 CF30 tensile strength, flexural modulus and density
The COA records tensile strength using ISO 527, flexural strength and flexural modulus using ISO 178, Charpy notched impact strength using ISO 179, and density using ISO 1183. Flexural modulus and flexural strength are different measurements; the reported units are GPa and MPa respectively. Density is reported in g/cm³. Preserve these units when comparing your design requirements with the report.
Batch results versus a PA66 CF30 technical data sheet
A COA records results for identified batches. It is not a complete technical data sheet and does not establish a guaranteed operating range for every shipment. The supplied report does not state the moisture conditioning, specimen preparation or processing history in the visible test table. Do not assume those conditions when comparing values with another material datasheet.
What to request before a material comparison
Ask for the current product specification, relevant test conditions and documentation for the lot being offered. If your project depends on fatigue, temperature, moisture conditioning or long-term service performance, request that information specifically; it is not established by the five reported tests. Do not infer finished-propeller qualification from a tensile-strength number.
Request PA66 CF30 BLACK batch documentation
For a quotation or material evaluation, send the required quantity, destination, intended application and the properties you need to verify. Ask whether a current COA, a technical data sheet or a sample is available for the proposed lot. The wholesale team will confirm availability individually.
Technical source: supplied COA, Shanghai Yunyuan New Material Technology Co., Ltd. Test dates: 2026-09-08 and 2026-09-03. Batch results do not guarantee future shipment or finished-part performance.
Read the complete COA ↗Request a PA66 CF30 quotation ↗